INSTALLATION
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Nov 2010 – Jul 2012 from Aug 2012
| 1.
INSTALL FUEL FILLER OPENING LID LOCK RETAINER |
 |
- Install the fuel filler opening lid lock retainer by rotating it as shown in the illustration.
Text in Illustration
 
|
Push
|
 
|
Turn
|
| 2.
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
 |
Engage the clamps and install the fuel lid lock control cable.


Text in Illustration
*1
|
Fuel Lid Lock Control Cable
|
*2
|
Clamp
|
- Install the fuel lid lock control cable by rotating it to the fuel filler opening lid lock retainer as shown in the illustration.
Text in Illustration
 
|
Push
|
 
|
Turn
|
| 3.
INSTALL FRONT FLOOR MAT |
 |
Engage the 14 clamps and install the front floor mat.
Install the 2 clips.
| 4.
INSTALL NO. 3 FLOOR CARPET HOOK |
 |
Install the 2 floor carpet hooks with the 2 screws.
| 5.
INSTALL NO. 2 FLOOR CARPET HOOK |
 |
Install the 2 floor carpet hooks with the 2 screws.
| 6.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
|
 |
Engage the 6 clips and the 8 claws and install the deck trim side panel.
Install the 3 screws.
| 7.
INSTALL REAR SEAT OUTER BELT ASSEMBLY LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 8.
INSTALL LAP BELT OUTER ANCHOR COVER
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 3 claws and install the lap belt outer anchor cover.
| 9.
INSTALL PACKAGE HOLDER NET HOOK
|
 |
- HINT:
- Use the same procedure to install all the package holder net hooks.
Install the package holder net hook with the bolt.
-
Torque:
- 8.1 N*m{
83 kgf*cm
, 72 in.*lbf
}
| 10.
INSTALL REAR FLOOR MAT ASSEMBLY
|
 |
Install the rear floor mat with the 2 clips.
| 11.
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
|
 |
- HINT:
- Use the same procedure for both sides.
Install the luggage hold belt striker with the bolt.
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
Install the cap.
| 12.
INSTALL REAR FLOOR MAT SUPPORT PLATE
|
 |
Engage the 11 claws and install the rear floor mat support plate.
Install the 5 screws.
| 13.
INSTALL REAR FLOOR BOARD
|
 |
Engage the clip and claw and install the rear floor board.
- Install the luggage hold belt striker with the bolt.
Text in Illustration
*1
|
Guide
|
*a
|
for RH Side
|
*b
|
for LH Side
|
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
- HINT:
- Use the same procedure for both sides.
| 14.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <E> bolts and 2 clips.
| 15.
INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH
|
 |
- Slide the console upper panel garnish toward the front of the vehicle and engage guide.
Engage the claw and 2 clips and install the console upper panel garnish.
| 16.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
|
 |
Connect the connectors.
Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.
Install the 2 <E> bolts.
| 17.
INSTALL INSTRUMENT PANEL FINISH PLATE
|
 |
- Install the instrument panel finish plate.
Text in Illustration
*1
|
Instrument Panel Finish Plate
|
| 18.
INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY |
 |
Connect the fuel lid lock control cable to fuel lid lock open lever.
Engage the 3 claws and install the fuel lid lock open lever.
| 19.
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
|
 |
Engage the 3 claws and install the hood lock control lever.
| 20.
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Engage the 4 clips and 2 claws and install the instrument panel register.
| 21.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
|
 |
Install the front door opening trim weatherstrip.
| 22.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
|
 |
Install the front door opening trim weatherstrip.
| 23.
INSTALL COWL SIDE TRIM BOARD RH
|
 |
Engage the 2 claws and install the cowl side trim board.
Install the clip.
| 24.
INSTALL COWL SIDE TRIM BOARD LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 25.
INSTALL REAR DOOR SCUFF PLATE RH
|
 |
Engage the 6 claws and install the access door scuff plate.
| 26.
INSTALL REAR DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 27.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
Engage the 14 claws and install the door scuff plate.
| 28.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 29.
INSTALL FRONT CONSOLE BOX
|
 |
Engage the 5 guides and install the front console box.
Install the 4 <H> bolts.
| 30.
INSTALL BOX BOTTOM MAT
|
 |
Install the box bottom mat.
| 31.
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
Engage the 3 guides and 5 clips and install the console upper rear panel.
| 32.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
|
 |
- Install the shift lever knob.
| 33.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Install the shift lever knob.
| 34.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
- Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.
Engage the 4 claws and install the parking brake hole cover.
| 35.
INSTALL REAR SEAT ASSEMBLY RH |
 |
(Click here)
| 36.
INSTALL REAR SEAT ASSEMBLY LH |
 |
(Click here)
| 37.
INSTALL FRONT SEAT ASSEMBLY |
 |
(Click here)