2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2012


1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY (for Fuel Main Tank)
(Click here)

2. REMOVE FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

  1. A223134
    Disconnect the fuel sender gauge assembly connector.

  1. A294472
    As shown in the illustration, disengage the lock of the claw, slide the claw upwards, and remove the fuel sender gauge assembly from the No. 1 fuel sub tank.


3. REMOVE FUEL SUB TANK SUB-ASSEMBLY (for Fuel Sub Tank)
(Click here)

4. REMOVE FUEL SUB-TANK FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

  1. A294459
    Disconnect the fuel sub-tank fuel sender gauge assembly connector.

  1. Remove the 5 screws and the fuel sub-tank fuel sender gauge assembly from the fuel sub tank sub-assembly.

    NOTICE:
    Be careful not to bend the arm of the fuel sub-tank fuel sender gauge assembly.

  1. Remove the gasket from the fuel sub-tank fuel sender gauge assembly.

← COMPONENTS (from Nov 2012)INSPECTION (from Nov 2012) →