Home › ENGINE › 1GR-FE COOLING › WATER PUMP

WATER PUMP > ON-VEHICLE INSPECTION

for Preparation Click here



1. REMOVE FAN SHROUD
  1. Remove the fan shroud (Click here).



2. INSPECT ENGINE WATER PUMP ASSEMBLY


    A174302E02
  1. Visually check the air hole and water hole for coolant leakage.
    Text in Illustration 
    *1
    Water Hole
    *2
    Air Hole
    If leakage is found, replace the engine water pump assembly.

  1. Turn the pulley and check that the water pump bearing moves smoothly and quietly.
    If necessary, replace the engine water pump assembly.



3. INSTALL FAN SHROUD
  1. Install the fan shroud (Click here).