Home › ENGINE › 1GR-FE IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > INSTALLATION

for Preparation Click here



1. INSTALL SPARK PLUG
  1. Install the 6 spark plugs to the cylinder head sub-assembly.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



2. INSTALL IGNITION COIL ASSEMBLY
  1. Install the 6 ignition coil assemblies to the cylinder head cover sub-assembly with the 6 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the 6 ignition coil assembly connectors.



3. INSTALL NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
(Click here)


4. INSTALL EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
(Click here)