Home › ENGINE › 1GR-FE IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
(Click here)


2. REMOVE NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)
(Click here)


3. REMOVE IGNITION COIL ASSEMBLY


    A226756
  1. Disconnect the 6 ignition coil assembly connectors.

  1. Remove the 6 bolts and the 6 ignition coil assemblies from the cylinder head cover sub-assembly.



4. REMOVE SPARK PLUG


    A226864
  1. Remove the 6 spark plugs from the cylinder head sub-assembly.