Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM

DTC    B279C    Theft Deterrent System Presence Detection

for Preparation Click here


DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.

DTC No.
DTC Detection Condition
Trouble Area
B279C
An ECM that is incompatible with engine immobiliser system is installed.
ECM

INSPECTION PROCEDURE

NOTICE:
If the ECM is replaced, register the ECU communication ID (Click here).

1.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    OK:
    DTC B279C is not output.



NG
REPLACE ECM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)