2014-2019 Hiace · Service Manual BRAKE

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Dec 2017

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


DTC CHECK/CLEAR (When Using GTS)
  1. Check the DTC.

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

    6. Check the details of the DTCs (Click here).

  2. Clear the DTC.

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Operate the GTS to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

    6. Clear the DTCs by following the prompts on the GTS.

      HINT:
      Refer to the GTS operator's manual for further details.

← DTC CHECK / CLEAR (Jan 2017 – Nov 2017)FREEZE FRAME DATA (Jan 2015 – Mar 2016) →