2014-2019 Hiace · Service Manual BRAKE

DTC CHECK / CLEAR

Troubleshooting · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


DTC CHECK/CLEAR (When Using GTS)
  1. Check the DTC.

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

    6. Check the details of the DTCs (Click here).

  2. Clear the DTC.

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Operate the GTS to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

    6. Clear the DTCs by following the prompts on the GTS.

      HINT:
      Refer to the GTS operator's manual for further details.


DTC CHECK/CLEAR (When Using SST Check Wire)

  1. Check the DTC.

    1. C166029E42
      Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
      SST
      09843-18040  
      Text in Illustration 
      *a
      Front view of DLC3

    2. Turn the ignition switch to ON.

    3. Observe the blinking pattern of the ABS warning and slip indicator lights in order to identify the DTC.

      HINT:
      If no code appears, inspect the TC and CG terminal circuit, and ABS warning and slip indicator light circuits.

      Trouble Area
      See Procedure
      TC and CG terminal circuit
      Click here
      ABS warning light circuit (Remains on)
      Click here
      ABS warning light circuit (Does not come on)
      Click here
      Slip indicator light circuit (Remains on)
      Click here
      Slip indicator light circuit (Does not come on)
      Click here

    4. Count the number of blinks of the ABS warning and slip indicator lights.

      HINT:
      1. When the system is operating correctly, each light will blink continuously in a pattern of 0.25 seconds on, and then 0.25 seconds off.
      2. When one DTC is output, each light will output the same code at 4 second intervals (for example, code 21 would be output as 2 blinks, a 1.5 second pause, and then 1 blink).
      3. When 2 or more DTCs are output, each light will output a different code at 2.5 second intervals, and when all codes have been output, there will be a 4 second pause and the sequence will repeat.
      4. When multiple codes are stored, they are output in order starting with the lowest DTC number.

    5. Check the details of the DTCs.

      ABS DTC 
      Warning Light Display
      GTS Display
      11
      C146E
      12
      C146F
      13
      C142B
      C146C
      14
      C146D
      21
      C1468
      22
      C1469
      23
      C146A
      24
      C146B
      25
      C1225
      31
      C1401
      C1405
      32
      C1402
      C1406
      33
      C1403
      C1407
      34
      C1404
      C1408
      35
      C1413
      36
      C1414
      38
      C1415
      39
      C1416
      41
      C120B
      C1241
      C1417
      43
      C1232
      C1243
      44
      C1419
      C1442
      45
      C1245
      46
      C1421
      C1422
      C1423
      C1424
      C142A
      C1449
      49
      C1425
      C1426
      51
      C1427
      C1428
      59
      C1203
      94
      U0073
      95
      U0124
      97
      C1381
      98
      C1336
      VSC DTC 
      Warning Light Display
      GTS Display
      31
      C1432
      C1433
      C1434
      34
      C1435
      C1436
      C1443
      36
      C1210
      51
      C1201
      63
      U0126
      65
      C1437
      U0100
      66
      C1290
      C1439
      C1445
      98
      C1440

    6. After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.

      HINT:
      If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.

  2. Clear the DTC.

    1. C166029E42
      Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
      SST
      09843-18040  
      Text in Illustration 
      *a
      Front view of DLC3

    2. Turn the ignition switch to ON.

    3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.

    4. Check that the warning light indicates a normal system code.

    5. Remove SST from the terminals of the DLC3.

      HINT:
      The DTCs cannot be cleared by disconnecting the battery terminal or the ECU-IG NO. 1 fuse.


END OF DTC CHECK/CLEAR
  1. Turn the ignition switch to ON.

  2. Check that the ABS warning and slip indicator lights go off within approximately 3 seconds after turning the ignition switch to ON.

← DTC CHECK / CLEAR (Jan 2015 – Mar 2016)DTC CHECK / CLEAR (Jan 2017 – Nov 2017) →