REMOVAL
Removal / installation · Vehicles built Jan 2015 – Dec 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017
| 1.
REMOVE AUTOMATIC TRANSMISSION ASSEMBLY |
 |
(Click here)
| 2.
REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY
|
 |
- Using SST, hold the crankshaft.
- SST
- 09213-54015
(91651-60855)
09330-00021
- Remove the 10 bolts, rear drive plate spacer, drive plate and ring gear sub-assembly and front drive plate spacer.
| 3.
REMOVE REAR CRANKSHAFT OIL SEAL |
 |
- Using a knife, cut through the rear crankshaft oil seal lip.
Text in Illustration
*a
|
Protective Tape
|
*b
|
Cut Position
|
Using a screwdriver with its tip taped, pry out the rear crankshaft oil seal.
- NOTICE:
- After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.