2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017


1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY
(Click here)

2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

  1. A102137E01
    Using SST, hold the crankshaft.
    SST
    09213-54015   (91651-60855)
    09330-00021  

  1. A102156E01
    Remove the 10 bolts, rear drive plate spacer, drive plate and ring gear sub-assembly and front drive plate spacer.


3. REMOVE REAR CRANKSHAFT OIL SEAL

  1. A102142E03
    Using a knife, cut through the rear crankshaft oil seal lip.
    Text in Illustration 
    *a
    Protective Tape
    *b
    Cut Position

  1. Using a screwdriver with its tip taped, pry out the rear crankshaft oil seal.

    NOTICE:
    After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

← REMOVAL (Jan 2015 – Dec 2016)INSTALLATION (Oct 2014 – Dec 2014) →