2014-2019 Hiace · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


2. REMOVE LOAD SENSING W/SPRING VALVE ASSEMBLY

  1. C102562
    Remove the 2 nuts and load sensing spring bracket from the rear axle.

  1. C102563
    Using a union nut wrench, disconnect the 3 brake tubes from the load sensing with spring valve assembly.

  1. Remove the 2 bolts and the load sensing with spring valve assembly from the body.

← ON-VEHICLE INSPECTION (from Oct 2014)DISASSEMBLY (from Oct 2014) →