2014-2019 Hiace · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE LOAD SENSING PROPORTIONING VALVE ASSEMBLY

  1. C102671E01
    Place the load sensing valve in the vise.

  1. Remove the nut while holding the bolt.

  1. Remove the 2 nuts, the valve set plate and the valve bracket.

  1. C061313
    Remove the clip and the load sensing proportioning valve assembly.


2. REMOVE LOAD SENSING SPRING BUSH & BOOT KIT

  1. C102673
    Place the load sensing spring bracket in the vise.

  1. Remove the bolt, load sensing spring bracket, collar and the 2 bushs from the spring shackle No.2.

  1. C102674E01
    Remove the 2 plate washers, spring washer, spring shackle No.1, bolt, and nut.

  1. C102745
    Remove the lock nut, spring shackle No.1, plate washer, and nut from the spring shackle No.2.

  1. C102675E01
    Remove the following parts from the load sensing spring.
    Symbol
    Name
    Quantity
    A
    Load sensing spring bush No.1
    2
    B
    Load sensing spring bush No.2
    2
    C
    Load sensing spring collar
    1
    D
    Load sensing valve boot
    1
    E
    Load sensing spring boot
    1
    F
    Load sensing spring washer
    2
    G
    Load sensing spring collar
    1

← REMOVAL (from Oct 2014)REASSEMBLY (from Oct 2014) →