INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL VACUUM PUMP ASSEMBLY |
Install the vacuum pump with the 4 bolts to the generator assembly.
- Torque:
- 7.8 N*m{ 80 kgf*cm , 69 in.*lbf }
| 2. INSTALL GENERATOR W/ VACUUM PUMP ASSEMBLY |
- HINT:
- Refer to the instructions for installation of the generator w/ vacuum pump assembly. (Click here)
| 3. INSPECT VACUUM PUMP ASSEMBLY |
Disconnect the vacuum hose.
Connect the vacuum gauge to the vacuum pump.
Start the engine.
Measure the vacuum with the engine idling.

- Standard:
- More than 650 mmHg (86.7 kPa).
