REMOVAL
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE FRONT BUMPER ASSEMBLY |
for Standard Body:
(Click here)
for Wide Body:
(Click here)
| 2. REMOVE HEADLIGHT ASSEMBLY LH |
![]() ![]() |
for Standard Body:
Put protective tape around the headlight assembly LH.
Text in Illustration *1
Protective Tape
Remove the 2 screws.
Detach the guide and pin.
Text in Illustration *2
Guide
*3
Pin
Disconnect each connector and remove the headlight assembly LH.
for Wide Body:

Put protective tape around the headlight assembly LH.
Text in Illustration *1
Protective Tape
Remove the 2 screws.
Detach the guide and pin.
Text in Illustration *2
Guide
*3
Pin
Disconnect each connector and remove the headlight assembly LH.

