Terminal No. (Symbol)
|
Wiring Color
|
Terminal Descriptions
|
Conditions
|
STD Voltages
|
B94-1 (BATT) - D116-59 (E1)
|
W - W-B
|
Battery (for measuring the battery voltage and for the ECM memory)
|
Always
|
11 to 14 V
|
D116-29 (+BM) - D116-59 (E1)
|
Y - W-B
|
Power source of throttle actuator
|
Always
|
11 to 14 V
|
B94-6 (IGSW) - D116-59 (E1)
|
B - W-B
|
Ignition switch
|
Ignition switch ON
|
11 to 14 V
|
B94-2 (+B) - D116-59 (E1)
|
L - W-B
|
Power source of ECM
|
Ignition switch ON
|
11 to 14 V
|
B94-3 (+B2) - D116-59 (E1)
|
L - W-B
|
Power source of ECM
|
Ignition switch ON
|
11 to 14 V
|
B94-46 (MREL) - D116-59 (E1)
|
G - W-B
|
EFI relay
|
Ignition switch ON
|
11 to 14 V
|
D116-134 (VCTA) - D116-133 (ETA)
|
L - Y
|
Power source of throttle position sensor (specific voltage)
|
Ignition switch ON
|
4.5 to 5.5 V
|
D116-135 (VTA1) - D116-133 (ETA)
|
R - Y
|
Throttle position sensor (for engine control)
|
Ignition switch ON, Accelerator pedal fully released
|
0.5 to 1.1 V
|
Ignition switch ON, Accelerator pedal fully depressed
|
3.3 to 4.9 V
|
D116-101 (VTA2) - D116-133 (ETA)
|
G - Y
|
Throttle position sensor (for sensor malfunction detection)
|
Ignition switch ON, Accelerator pedal fully released
|
2.1 to 3.1 V
|
Ignition switch ON, Accelerator pedal fully depressed
|
4.5 to 5.0 V
|
B94-47 (VPA) - B94-48 (EPA)
|
L - G
|
Accelerator pedal position sensor (for engine control)
|
Ignition switch ON, Accelerator pedal fully released
|
0.5 to 1.1 V
|
Ignition switch ON, Accelerator pedal fully depressed
|
2.6 to 4.5 V
|
B94-50 (VPA2) - B94-51 (EPA2)
|
B - GR
|
Accelerator pedal position sensor (for sensor malfunctioning detection)
|
Ignition switch ON, Accelerator pedal fully released
|
1.2 to 2.0 V
|
Ignition switch ON, Accelerator pedal fully depressed
|
3.4 to 4.75 V
|
B94-49 (VCPA) - B94-48 (EPA)
|
W - G
|
Power source of accelerator pedal position sensor (for VPA)
|
Ignition switch ON
|
4.5 to 5.5 V
|
B94-52 (VCP2) - B94-51 (EPA2)
|
R - GR
|
Power source of accelerator pedal position sensor (for VPA2)
|
Ignition switch ON
|
4.5 to 5.5 V
|
D116-137 (VG) - D116-104 (E2G)
|
Y-G - L
|
Mass air flow meter
|
Idling, Shift position P or N, A/C switch OFF
|
0.5 to 3.0 V
|
D116-138 (THA) - D116-139 (ETHA)
|
R - Y
|
Intake air temperature sensor
|
Idling, Intake air temperature 20°C (68°F)
|
0.5 to 3.4 V
|
D116-120 (THW) - D116-119 (ETHW)
|
R-W - Y
|
Engine coolant temperature sensor
|
Idling, Engine coolant temperature 80°C (176°F)
|
0.2 to 1.0 V
|
D116-78 (RTHW) - D116-76 (E2)
|
L - Y
|
Engine coolant temperature (radiator) sensor
|
Idling, radiator side engine coolant temperature -20 to 80°C (-4 to 176°F)
|
0.5 to 4.5 V
|
D116-117 (VCIB) - D116-118 (EIB)
|
Y - W
|
Power source of battery current sensor (specific voltage)
|
Ignition switch ON
|
4.5 to 5.5 V
|
D116-86 (IB) - D116-118 (EIB)
|
Y - W
|
Battery current sensor
|
Ignition switch ON (Temperature of thermistor of battery current sensor: -30 to 90°C (-22 to 194°F))
|
0.5 to 4.5 V
|
D116-87 (THB) - D116-118 (EIB)
|
R - W
|
Battery temperature sensor
|
Ignition switch ON
|
0.5 to 4.5 V
|
D116-21 (#10) - D116-57 (E01)
|
B - W-B
|
Fuel injector
|
Ignition switch ON
|
11 to 14 V
|
D116-18 (#20) - D116-57 (E01)
|
L - W-B
|
D116-19 (#30) - D116-57 (E01)
|
Y - W-B
|
Idling
|
Pulse generation (see waveform 1)
|
D116-20 (#40) - D116-57 (E01)
|
R - W-B
|
D116-45 (IGT1) - D116-59 (E1)
|
R-L - W-B
|
Ignition coil with igniter (ignition coil signal)
|
Idling
|
Pulse generation (see waveform 2)
|
D116-44 (IGT2) - D116-59 (E1)
|
L-W - W-B
|
D116-43 (IGT3) - D116-59 (E1)
|
B-Y - W-B
|
D116-42 (IGT4) - D116-59 (E1)
|
Y-R - W-B
|
D116-71 (IGF1) - D116-59 (E1)
|
W-R - W-B
|
Ignition coil with igniter (ignition confirmation signal)
|
Ignition switch ON
|
4.5 to 5.0 V
|
Idling
|
Pulse generation (see waveform 2)
|
D116-116 (VCV1) - D116-59 (E1)
|
B-R - W-B
|
Power source of Camshaft position sensor (for intake side) (specific voltage)
|
Ignition switch ON
|
4.5 to 5.5 V
|
D116-82 (VV1+) - D116-115 (VV1-)
|
L - Y
|
Camshaft position sensor (for intake side)
|
Idling with warm engine
|
Pulse generation (see waveform 16)
|
D116-111 (VCE1) - D116-59 (E1)
|
B-R - W-B
|
Power source of Camshaft position sensor (for exhaust side) (specific voltage)
|
Ignition switch ON
|
4.5 to 5.5 V
|
D116-80 (EV1+) - D116-112 (EV1-)
|
G - R
|
Camshaft position sensor (for exhaust side)
|
Idling with warm engine
|
Pulse generation (see waveform 16)
|
D116-114 (NE+) - D116-113 (NE-)
|
W - B
|
Crankshaft position sensor
|
Idling with warm engine
|
Pulse generation (see waveform 3)
|
B94-41 (FC) - D116-59 (E1)
|
L - W-B
|
Fuel pump control
|
Ignition switch ON
|
11 to 14 V
|
Idling
|
Below 1.5 V
|
D116-60 (M+) - D116-28 (ME01)
|
Y - W-B
|
Throttle actuator
|
Idling with warm engine
|
Pulse generation (see waveform 4)
|
D116-30 (M-) - D116-28 (ME01)
|
L - W-B
|
Throttle actuator
|
Idling with warm engine
|
Pulse generation (see waveform 5)
|
D116-100 (A1A+) - D116-59 (E1)
|
Y - W-B
|
A/F sensor
|
Always (Ignition switch ON)
|
3.3 V*1
|
D116-132 (A1A-) - D116-59 (E1)
|
L - W-B
|
A/F sensor
|
Always (Ignition switch ON)
|
3.0 V*1
|
D116-99 (OX1B) - D116-131 (EX1B)
|
BR - Y
|
Heated oxygen sensor
|
Engine speed maintained 2500 rpm for 2 minutes after warming up sensor
|
Pulse generation (see waveform 6)
|
D116-27 (HA1A) - D116-26 (E04)
|
Y - W-B
|
A/F sensor heater
|
Idling
|
Below 3.0 V
|
Ignition switch ON
|
11 to 14 V
|
D116-55 (HT1B) - D116-26 (E04)
|
Y - W-B
|
Heated oxygen sensor heater
|
Idling
|
Below 3.0 V
|
Ignition switch ON
|
11 to 14 V
|
D116-122 (KNK1) - D116-121 (EKNK)
|
G - R
|
Knock sensor
|
Maintain engine speed 4000 rpm after warming up
|
Pulse generation (see waveform 7)
|
D116-35 (OC1+) - D116-34 (OC1-)
|
G - B
|
Camshaft timing oil control valve (for intake side)
|
Idling
|
Pulse generation (see waveform 8)
|
D116-37 (OE1+) - D116-36 (OE1-)
|
R - P
|
Camshaft timing oil control valve (for exhaust side)
|
Idling
|
Pulse generation (see waveform 8)
|
D116-33 (PRG) - D116-59 (E1)
|
B - W-B
|
Purge VSV
|
Ignition switch ON
|
11 to 14 V
|
Idling
|
Pulse generation (see waveform 9)
|
B94-29 (STA) - D116-59 (E1)
|
R - W-B
|
Starter signal
|
Shift position N, ignition switch START
|
5.5 V or more
|
B94-9 (STP) - D116-59 (E1)
|
Y - W-B
|
Stop light switch
|
Brake pedal depressed
|
7.5 to 14 V
|
Brake pedal released
|
Below 1.5 V
|
B94-10 (ST1-) - D116-59 (E1)
|
R - W-B
|
Stop light switch
|
Ignition switch ON, Brake pedal depressed
|
Below 1.5 V
|
Ignition switch ON, Brake pedal released
|
7.5 to 14 V
|
B94-34 (ELS2) - D116-59 (E1)
|
B - W-B
|
Electric load
|
Defogger ON
|
7.5 to 14 V
|
Defogger OFF
|
0 to 1.5 V
|
B94-63 (ELS3) - D116-59 (E1)
|
W - W-B
|
Electric load
|
Voltage inverter ON
|
7.5 to 14 V
|
Voltage inverter OFF
|
0 to 1.5 V
|
B94-62 (ELS4) - D116-59 (E1)
|
G - W-B
|
Electric load
|
Electric load ON
|
7.5 to 14 V
|
Electric load OFF
|
0 to 1.5 V
|
B94-31 (TACH) - D116-59 (E1)
|
B - W-B
|
Engine speed
|
Idling
|
Pulse generation (see waveform 10)
|
B94-44 (SPD) - D116-59 (E1)
|
P - W-B
|
Speed signal from combination meter
|
Driving at 20 km/h (12 mph)
|
Pulse generation (see waveform 11)
|
B94-33 (TC) - D116-59 (E1)
|
G - W-B
|
Terminal TC of DLC3
|
Ignition switch ON
|
11 to 14 V
|
D116-94 (PSW) - D116-59 (E1)
|
G - W-B
|
Power steering oil pressure switch
|
While turning steering wheel
|
Below 1.5 V
|
B94-23 (NSW) - D116-59 (E1)
|
B - W-B
|
Park/Neutral switch signal
|
IG switch ON and shift lever in P or N position
|
Below 1 V
|
IG switch ON and shift lever in any position except P and N
|
11 to 14 V
|
B94-13 (CANH) - D116-59 (E1)
|
B - W-B
|
Communication signal with other components
|
Ignition switch ON
|
Pulse generation (see waveform 13)
|
B94-26 (CANL) - D116-59 (E1)
|
W - W-B
|
Communication signal with other components
|
Ignition switch ON
|
Pulse generation (see waveform 14)
|
B94-21 (AIRV) - D116-59 (E1)
|
Y - W-B
|
Air switch valve for secondary air injection system
|
Ignition switch ON
|
11 to 14 V
|
B94-20 (AIRP) - D116-59 (E1)
|
W - W-B
|
Air pump control
|
Ignition switch ON
|
11 to 14 V
|
B94-16 (AIDI) - D116-59 (E1)
|
LG - W-B
|
Diagnostic information signal for secondary air injection system
|
Secondary air injection system operates
|
Pulse generation (see waveform 15)
|
D116-129 (VCAI) - D116-130 (EAIP)
|
L - Y
|
Power source of air pressure sensor (specific voltage)
|
Ignition switch ON
|
4.5 to 5.0 V
|
D116-98 (AIP) - D116-130 (EAIP)
|
R - Y
|
Air pressure sensor
|
Ignition switch ON
|
0.5 to 4.5 V
|
B94-60 (RFC) - D116-59 (E1)
|
LG - W-B
|
Cooling fan control signal
|
Ignition switch ON, A/C switch on (max cool)
|
Pulse generation (See waveform 17)
|
B94-18 (INH) - D116-59 (E1)
|
L - W-B
|
Charge inhibit signal
|
Front wiper switch HI
|
11 to 14 V
|
D116-31 (LIN) - D116-59 (E1)
|
R - W-B
|
LIN communication signal
|
Ignition switch ON
|
Pulse generation
|