BASIC INSPECTION
Troubleshooting · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 from Jan 2015
When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential for engine troubleshooting.
| 1.CHECK BATTERY VOLTAGE |
- CAUTION:
- Carry out this check with the engine stopped and ignition switch OFF.
| Result |
Proceed To |
| 11 V or more |
A |
| Below 11 V |
B |
|
|||||
| |||||
| 2.CHECK IF ENGINE CRANKS |
|
|||||
| |||||
| 3.CHECK ENGINE STARTS |
|
|||||
| |||||
| 4.CHECK AIR FILTER |
Visually check that the air filter is not contaminated with dirt or oil.
|
|||||
| |||||
| 5.CHECK IDLING SPEED |
Check idling speed (Click here).
|
|||||
| |||||
| 6.CHECK FUEL PRESSURE |
Check fuel pressure (Click here).
|
|||||
| |||||
| 7.CHECK FOR SPARKS |
Check for sparks (Click here).
|
|||||
| |||||