2014-2019 Hiace · Service Manual STEERING

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT VANE PUMP SHAFT AND BUSH IN FRONT VANE PUMP HOUSING

  1. F047395E07
    Using a micrometer, measure the outer diameter of the vane pump shaft.
    Text in Illustration 
    *a
    Outer Diameter
    *b
    Inner Diameter

  1. Using a vernier caliper, measure the inner diameter of the vane pump front housing bush.

  1. Calculate the oil clearance.
    Oil clearance = Inner diameter of the bush - Outer diameter of the shaft

    Maximum oil clearance:
    0.07 mm (0.00276 in.)

    If the oil clearance is more than the maximum, replace the vane pump assembly.


INSPECT VANE PUMP ROTOR AND VANE PUMP PLATE

  1. C101977E02
    Using a micrometer, measure the thickness of the vane pump plates.
    Text in Illustration 
    *a
    Thickness

    Standard thickness:
    1.405 to 1.411 mm (0.0554 to 0.0555 in.)

    If the thickness is not as specified, replace the vane pump assembly.

  1. C101978E02
    Using a feeler gauge, measure the clearance between the side of the vane pump rotor groove and the vane pump plates.
    Text in Illustration 
    *1
    Feeler Gauge

    Maximum clearance:
    0.025 mm (0.00098 in.)

    If the clearance is more than the maximum, replace the vane pump assembly.

← DISASSEMBLY (from Jan 2017)REASSEMBLY (from Jan 2017) →