2014-2019 Hiace · Service Manual STEERING

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2017


1. SECURE VANE PUMP ASSEMBLY

  1. C370627E01
    Using SST, secure the vane pump assembly in a vise.
    SST
    09630-00014   (09631-00132)


2. REMOVE SUCTION PORT UNION

  1. C370628
    Remove the bolt and suction port union.

  1. Remove the O-ring from the suction port union.


3. REMOVE PRESSURE PORT UNION SUB-ASSEMBLY

  1. C370630
    Remove the pressure port union sub-assembly and O-ring.


4. REMOVE REAR VANE PUMP HOUSING

  1. C370629
    Remove the 4 bolts and rear vane pump housing.

  1. Remove the O-ring from the rear vane pump housing.


5. REMOVE VANE PUMP ROTOR
  1. Remove the 10 vane pump plates.

    NOTICE:
    Take care not to drop the vane pump plates.

  1. Remove the vane pump rotor.


6. REMOVE VANE PUMP SHAFT WITH PULLEY

  1. C322711
    Using 2 screwdrivers, remove the snap ring from the vane pump shaft with pulley.

  1. Remove the vane pump shaft with pulley.


7. REMOVE VANE PUMP CAM RING
  1. Remove the vane pump cam ring from the vane pump front housing.


8. REMOVE FRONT VANE PUMP SIDE PLATE
  1. Remove the front vane pump side plate from the vane pump front housing.

  1. C101969
    Remove the O-ring from the front vane pump side plate.

  1. C370631
    Remove the O-ring from the front vane pump housing.


9. REMOVE VANE PUMP HOUSING OIL SEAL

  1. C370638E01
    Using a screwdriver and piece of cloth, pry out the vane pump housing oil seal.
    Text in Illustration 
    *a
    Cloth

    NOTICE:
    Be careful not to damage the front vane pump housing.

← REMOVAL (from Jan 2017)INSPECTION (from Jan 2017) →