2014-2019 Hiace · Service Manual BRAKE

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017


DESCRIPTION
  1. If the ABS system or skid control ECU detects a malfunction, the ABS warning light will come on to warn the driver.

  2. C052361E48
    The DTCs are simultaneously stored in memory.
    The DTCs can be read by connecting the SST between terminals TC (13) and CG (4) of the DLC3 and observing the blinking pattern of the ABS warning light, or by connecting an intelligent tester (Click here).
    SST
    09843-18043  


WARNING LIGHT BULB CHECK
  1. When the ignition switch is turned to the ON position, check that the ABS warning light comes on for approximately 3 seconds.

    HINT:
    If the warning light check result is not normal, proceed to troubleshooting for the ABS warning light circuit.
    If the indicator remains on, proceed to troubleshooting for the light circuit below.

    Trouble Area
    See procedure
    ABS warning light circuit
    Click here

← TERMINALS OF ECU (from Jan 2015)DIAGNOSIS SYSTEM (Jan 2015 – Dec 2016) →