C1421 Open or Short in Master Cylinder Pressure Sensor
Diagnostic trouble codes · Vehicles built Jan 2015 – Mar 2016
Also covers:
- C1423 Master Cylinder Pressure Sensor Zero Point Low Malfunction
- C1424 Master Cylinder Pressure Sensor Output Malfunction
- C142A Master Cylinder Pressure Sensor Internal Malfunction
- C1449 Master Cylinder Output Value Malfunction
Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1421 |
Either of the following is detected:
|
Brake actuator assembly (Master cylinder pressure sensor) |
| C1423 |
Master cylinder pressure is below -0.744 MPa (-7.6 kgf/cm2, -107 psi) for 5 seconds or more. |
Brake actuator assembly (Master cylinder pressure sensor) |
| C1424 |
Either of the following is detected:
|
Master cylinder pressure sensor (Brake actuator assembly) |
| C142A |
Either of the following is detected:
|
Brake actuator assembly (Master cylinder pressure sensor) |
| C1449 |
Master cylinder pressure sensor invalid condition continues for 0.2 seconds or more. |
Brake actuator assembly (Master cylinder pressure sensor) |
WIRING DIAGRAM
Refer to DTC C1425 (Click here).INSPECTION PROCEDURE
- NOTICE:
- When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information (Click here).
| 1. REPLACE BRAKE ACTUATOR ASSEMBLY |
Replace the brake actuator assembly (master cylinder pressure sensor) (Click here).
| NEXT | ||
| ||
