2014-2019 Hiace · Service Manual ENGINE

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built from Jan 2017

HINT:
*: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS CHECK

      HINT:
      1. In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
      2. Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

      1. The following 5 items are important points in the problem analysis:
        What
        Vehicle model, system name
        When
        Date, time, occurrence frequency
        Where
        Road conditions
        Under what conditions?
        Running conditions, driving conditions, weather conditions
        How did it happen?
        Problem symptoms
    NEXT

    3.INSPECT BATTERY VOLTAGE
    1. Measure the battery voltage.

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    NEXT

    4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Use the GTS to check if the CAN communication system is functioning normally (Click here).


    2. Result:
      Result
      Proceed to
      CAN communication system DTC is not output
      A
      CAN communication system DTC is output (for LHD with Central Gateway ECU)
      B


    B.
    A

    5.CHECK DTC AND FREEZE FRAME DATA*
    1. Check for DTCs (Click here).

    2. Check for freeze frame data (Click here).

    3. HINT:
      Record or print DTCs and freeze frame data if necessary.

    NEXT

    6.CLEAR DTC AND FREEZE FRAME DATA*
    1. Clear the DTCs and freeze frame data (Click here).

    NEXT

    7.PROBLEM SYMPTOMS TABLE

      Result:
      Result
      Proceed to
      Malfunctioning parts are not confirmed
      A
      Malfunctioning parts are confirmed
      B


    B.
    A

    8.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. Data List / Active Test (Click here).


    2. Result:
      Result
      Proceed to
      Malfunctioning parts are not confirmed
      A
      Malfunctioning parts are confirmed
      B


    B.
    A

    9.CHECK ECM CIRCUIT

      HINT:
      Refer to Terminals of ECM (Click here).

      Result:
      Result
      Proceed to
      OK
      A
      NG
      B


    B.
    A

    10.CHECK FOR INTERMITTENT PROBLEMS

      HINT:
      Refer to Symptom Simulation (Click here).

    NEXT

    11.CONDUCT PARTS INSPECTION
      NEXT

      12.IDENTIFY PROBLEM
        NEXT

        13.ADJUST AND/OR REPAIR
          NEXT

          14.CONDUCT CONFIRMATION TEST
            NEXT

            ← SYSTEM DIAGRAM (from Jan 2017)PROBLEM SYMPTOMS TABLE (from Jan 2017) →