2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT PISTON OPERATION OF OVERDRIVE BRAKE

  1. AT08451
    Place the O/D support assembly onto the direct clutch assembly.

  1. AT08149
    Apply compressed air (392 kPa, 4 kgf/cm2, 57 psi) into the oil passage, and check that the O/D brake piston moves smoothly.


INSPECT OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY

  1. D001246
    Measure the free length of the spring together with the spring seat.

    Standard free length:
    17.03 mm (0.671 in.)


INSPECT OVERDRIVE BRAKE CLUTCH DISC

  1. AT06454E02
    Check if the sliding surface of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

    HINT:
    1. If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.
    2. Before assembling new discs, soak them in ATF for at least 15 minutes.


INSPECT PISTON OPERATION OF OVERDRIVE BRAKE

  1. AT08149
    Place the O/D support assembly onto the direct clutch assembly.

  1. Apply compressed air (392 kPa, 4 kgf/cm2, 57 psi) into the oil passage as shown, and be sure that the O/D brake piston moves smoothly.

← DISASSEMBLY (from Oct 2014)REASSEMBLY (from Oct 2014) →