INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT PACK CLEARANCE OF DIRECT CLUTCH |
Place the direct clutch assembly onto the O/D support assembly.

Using SST and a dial indicator, measure the direct clutch pack clearance while applying and releasing compressed air (186 to 206 kPa, 1.9 to 2.1 kgf/cm2, 27 to 30 psi).

- Pack Clearance:
- 0.40 to 0.70 mm (0.016 to 0.028 in.)
| INSPECT DIRECT CLUTCH FLANGE |
Check to see if the sliding surface of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

- HINT:
- If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.
| INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY |
Measure the free length of the spring together with the spring seat.

- Standard free length:
- 21.32 mm (0.839 in.)
| INSPECT DIRECT CLUTCH PISTON SUB-ASSEMBLY |
Check that the check ball is free by shaking the piston.

Check that the valve does not have leaks by applying low-pressure compressed air.
| INSPECT DIRECT CLUTCH DRUM SUB-ASSEMBLY |
Using a deal indicator, measure the inside diameter of the clutch drum bushing.

- Maximum inside diameter:
- 53.97 mm (2.1248 in.)
| INSPECT PACK CLEARANCE OF DIRECT CLUTCH |
Place the direct clutch assembly onto the O/D support assembly.

Using SST and a dial indicator, measure the direct clutch piston stroke while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).

- SST
- 09350-30020
(09350-06120)
- Pack Clearance:
- 0.40 to 0.70 mm (0.016 to 0.028 in.)
If the pack clearance is outside the standard, select another flange.- HINT:
- There are 8 different flanges in thickness.
- Flange thickness:
- mm (in.)
No.
Thickness
No.
Thickness
53
3.3 (0.130)
57
3.7 (0.146)
54
3.4 (0.134)
58
3.8 (0.150)
55
3.5 (0.138)
60
4.0 (0.157)
56
3.6 (0.142)
62
4.2 (0.165)
