2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT SECOND BRAKE PISTON

  1. AT08439
    Make sure the 2nd brake piston moves smoothly when applying and releasing low-pressure compressed air to the 2nd brake drum.


INSPECT DIRECT MULTIPLE DISC CLUTCH

  1. AT06455E02
    Check to see if the sliding surfaces of the disc, the plate and the flange are worn or burnt. If necessary, replace them.

    HINT:
    1. If the lining of the disc is peeled off or discolored, or even if only a part of the printed numbers is corroded, replace all discs.
    2. Before assembling new discs, soak them in ATF for at least 15 minutes.


INSPECT SECOND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

  1. D029781
    Using vernier calipers, measure the free length of the spring together with the spring seat.

    Standard free length:
    16.05 mm (0.6319 in.)

← DISASSEMBLY (from Oct 2014)REASSEMBLY (from Oct 2014) →