INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT PISTON STROKE OF FORWARD CLUTCH |
Using SST and a dial indicator, measure the forward clutch piston stroke while applying and releasing compressed air (392 to 785 kPa, 4.0 to 8.0 kgf/cm2, 57 to 114 psi).

- SST
- 09350-30020
(09350-06120)
- Piston stroke:
- 0.6 to 1.0 mm (0.023 to 0.039 in.)
| INSPECT FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC |
Check to see if the sliding surfaces of the disc, plate and flange are worn or burnt. If necessary, replace them.

- HINT:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers is defaced, replace all discs.
| INSPECT FRONT CLUTCH PISTON SUB-ASSEMBLY |
Check that the check ball is free by shaking the piston.

Check that the valve does not have leaks by applying low-pressure compressed air.
| INSPECT INPUT SHAFT SUB-ASSEMBLY |
Using a dial indicator, measure the inside diameter of the forward clutch drum bushing.

- Maximum inside diameter:
- 24.08 mm (0.948 in.)
