INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Dec 2014
| 1. INSTALL TRANSMISSION WIRE |
Coat a new O-ring with ATF, and install it to the transmission wire.
Install the transmission wire to the automatic transmission assembly with the bolt.
- Torque:
- 16 N*m{ 160 kgf*cm , 12 ft.*lbf }
| 2. CONNECT TRANSMISSION WIRE |
Connect the 4 connectors to the 4 shift solenoid valves.
Install the clamp with the bolt to the transmission valve body assembly.
- Torque:
- 9.8 N*m{ 100 kgf*cm , 87 in.*lbf }
| 3. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
Install the 2 transmission oil cleaner magnets to the locations indicated in the illustration.

- NOTICE:
- Be careful not to spill oil on the contacting surfaces of the transmission case sub-assembly and automatic transmission oil pan sub-assembly.
Install a new automatic transmission oil pan gasket and the automatic transmission oil pan sub-assembly with the 14 bolts.

- Torque:
- 4.4 N*m{ 45 kgf*cm , 39 in.*lbf }
| 4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
Coat a new O-ring with ATF, and install it to the transmission oil filler tube sub-assembly.
Install the transmission oil filler tube sub-assembly with the 2 bolts.
- Torque:
- 12 N*m{ 122 kgf*cm , 9 ft.*lbf }
Install the oil level dipstick.
| 5. ADD AUTOMATIC TRANSMISSION FLUID |
- Fluid type:
- Toyota Genuine ATF Type T-IV
| 6. INSTALL TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY |
Install the transmission oil level gauge sub-assembly.
| 7. CHECK AUTOMATIC TRANSMISSION FLUID LEVEL |
