2014-2019 Hiace · Service Manual ENGINE

P1611 ECM/PCM Processor / Run Pulse

Diagnostic trouble codes · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
P1611
ECU malfunction
ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


1. READ OUTPUT DTC (INTERIOR IC DTC IS OUTPUT AGAIN)
  1. Clear the DTC (Click here).

  1. Turn the ignition switch to ON.

  1. Check the DTC (Click here).

    Result:
    Display (DTC output)
    Proceed to
    DTC P1611 is output again
    A
    No DTC output
    B



B
CHECK FOR INTERMITTENT PROBLEMS (Click here)
A

REPLACE ECM (Click here)


← P1520 Stop Light Switch Circuit (from Oct 2014)P1611 ECM/PCM Processor / Run Pulse (from Jan 2015) →