2014-2019 Hiace · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working (Click here).


2. REMOVE FRONT DOOR SCUFF PLATE LH
for Semi-trim (Click here)
for Full-trim (Click here)

3. REMOVE FRONT DOOR OPENING TRIM LH
for Semi-trim (Click here)
for Full-trim (Click here)

4. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim LH Side)

  1. B102494
    Remove the screw and separator bar bracket lower.

    HINT:
    Use the same procedure described for the other side.


5. REMOVE CENTER PILLAR GARNISH COVER LOWER LH
for Semi-trim (Click here)
for Full-trim (Click here)

6. REMOVE SEAT ASSEMBLY LH
for Semi-trim (Click here)
for Full-trim (Click here)

7. REMOVE SEAT BELT ANCHOR COVER (for LH Side)

  1. B113923
    Disengage the claw and remove the 2 clips and seat belt anchor cover.


8. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

  1. B103256
    Remove the bolt and disconnect the floor side of the front seat outer belt assembly LH.


9. REMOVE CENTER PILLAR GARNISH LOWER LH (for Semi-trim)

  1. B106182E01
    Using a screwdriver, detach the 4 clips and remove the center pillar garnish lower LH.


10. REMOVE REAR NO.2 SEAT ASSEMBLY (for Full-trim LH Side)

  1. B107603
    Remove the 4 bolts, 2 nuts and rear No.2 seat assembly.

    HINT:
    1. Use the same procedure for the second row.
    2. Use the same procedure for the third row.


11. REMOVE REAR NO.3 SEAT ASSEMBLY (for Full-trim LH Side)

  1. B105606
    Remove the 6 bolts, 2 nuts and rear No.3 seat assembly.


12. REMOVE REAR NO.4 SEAT ASSEMBLY (for Full-trim LH Side)

  1. B107625
    Remove the 3 bolts and 2 nuts.

  1. Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.


13. REMOVE BACK DOOR SCUFF PLATE (for Full-trim LH Side)

  1. B106176E01
    Detach the 7 clips and 4 claws and remove the back door scuff plate.


14. REMOVE BACK DOOR WEATHERSTRIP (for Full-trim LH Side)

15. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH (for Full-trim)
for Middle roof type (Click here)
for High roof type (Click here)

16. REMOVE SIDE NO.1 TRIM ASSEMBLY LH (for Full-trim)

  1. B113349
    Detach the 21 clips and remove the side No. 1 trim assembly LH.


17. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH

  1. B113924
    Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly LH.

    HINT:
    Tape the screwdriver tip before use.

  1. B103246
    Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly LH.

  1. B103257
    w/o Pretensioner:

    1. Remove the bolt and front seat outer belt assembly LH.

  1. B103924
    w/ Pretensioner:

    1. Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.

      HINT:
      Tape the screwdriver tip before use.

    2. B103925
      Remove the 2 bolts and front seat outer belt assembly LH.


18. REMOVE FRONT DOOR SCUFF PLATE RH
for Semi-trim (Click here)
for Full-trim (Click here)

19. REMOVE FRONT DOOR OPENING TRIM RH
for Semi-trim (Click here)
for Full-trim (Click here)

20. REMOVE REAR DOOR SCUFF PLATE RH (for Full-trim)

  1. B113347
    Detach the 11 clips and remove the rear door scuff plate RH.


21. REMOVE SLIDE DOOR WEATHERSTRIP NO.1 RH
for Semi-trim (Click here)
for Full-trim (Click here)

22. REMOVE SEPARATOR BAR BRACKET LOWER (for Semi-trim RH Side)

  1. B102494
    Remove the screw and separator bar bracket lower.

    HINT:
    Use the same procedure described for the other side.


23. REMOVE ASSIST GRIP PLUG (for Full-trim RH Side)

  1. B113268
    Using a screwdriver, detach the 4 claws and remove the 2 assist grip plugs.

    HINT:
    Tape the screwdriver tip before use.


24. REMOVE ASSIST GRIP ASSEMBLY REAR (for Full-trim RH Side)

  1. B113269
    Remove the 2 screws and assist grip assembly rear.


25. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

  1. B103254
    Remove the bolt and disconnect the floor side of the front seat outer belt assembly RH.


26. REMOVE CENTER PILLAR GARNISH LOWER RH
for Semi-trim (Click here)
for Full-trim (Click here)

27. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH

  1. B113925
    Using a screwdriver, disengage the 2 claws and disconnect the shoulder side cover of the front seat outer belt assembly RH.

    HINT:
    Tape the screwdriver tip before use.

  1. B101642
    Remove the bolt and disconnect the shoulder side of the front seat outer belt assembly RH.

  1. B113926
    w/o Pretensioner:

    1. Remove the bolt and front seat outer belt assembly RH.

  1. B101643
    w/ Pretensioner:

    1. Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector.

      HINT:
      Tape the screwdriver tip before use.

    2. B101644
      Remove the 2 bolts and front seat outer belt assembly RH.

← COMPONENTS (from Jan 2017)REMOVAL (Jan 2015 – Mar 2016) →