2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


1. INSTALL CAMSHAFT POSITION SENSOR
  1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

  1. Install the camshaft position sensor with the bolt.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }

    NOTICE:
    1. When reusing the camshaft position sensor, inspect the O-ring.
    2. Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

  1. Connect the camshaft position sensor connector.

← INSPECTION (Oct 2014 – Dec 2014)INSTALLATION (from Jan 2015) →