2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Oct 2014 – Dec 2014


INSPECT CAMSHAFT POSITION SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Specified Condition
    1 - 2
    950 to 1250 Ω at 20°C (68°F)

    If the result is not as specified, replace the camshaft position sensor.

← REMOVAL (from Jan 2015)INSTALLATION (Oct 2014 – Dec 2014) →