INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1. INSTALL DIESEL TURBO INLET AIR TEMPERATURE SENSOR (w/ Intercooler) |
Install a new gasket and the diesel turbo inlet air temperature sensor.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the diesel turbo inlet air temperature sensor connector.
| 2. INSTALL ENGINE SERVICE HOLE COVER NO. 2 (w/ Intercooler) |
Install the engine service hole cover No.2 with the 3 bolts.
- Torque:
- 13 N*m{ 133 kgf*cm , 10 ft.*lbf }
Return the carpet.

| 3. INSTALL INTAKE AIR TEMPERATURE SENSOR |
Install the intake air temperature sensor to the air cleaner with hose.
| 4. INSTALL AIR CLEANER WITH HOSE |
Attach the wire harness clamp and connect the intake air temperature sensor connector.
Install the air cleaner with hose with the 3 bolts.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
Connect the air cleaner hose.
Tighten the hose clamp.
| 5. INSTALL NO. 1 AIR CLEANER INLET |
Install the No. 1 air cleaner inlet with the bolt.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
| 6. INSTALL HEADLIGHT ASSEMBLY RH |
- for Halogen Headlight: (Click here)
- for LED Headlight: (Click here)
| 7. INSTALL FRONT BUMPER |
- for Standard Body: (Click here)
- for Wide Body: (Click here)
