2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT INTAKE AIR TEMPERATURE SENSOR

  1. A098859E05
    Using an ohmmeter, measure the resistance between the terminals.

    Standard resistance:
    2.21 to 2.65 kΩ at 20°C (68°F)

    NOTICE:
    When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

    If the result is not as specified, replace the sensor.


INSPECT DIESEL TURBO INLET AIR TEMPERATURE SENSOR

  1. Z017274E05
    Using an ohmmeter, measure the resistance between the terminals.

    Standard resistance:
    2.21 to 2.65 kΩ at 20°C (68°F)

    NOTICE:
    When checking the intake air temperature sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

    If the result is not as specified, replace the sensor.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2016) →