REMOVAL
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE FRONT BUMPER |
 |
- for Standard Body: (Click here)
- for Wide Body: (Click here)
| 2.
REMOVE HEADLIGHT ASSEMBLY RH |
 |
- for Halogen Headlight: (Click here)
- for LED Headlight: (Click here)
| 3.
REMOVE NO. 1 AIR CLEANER INLET |
 |
- Remove the bolt and No. 1 air cleaner inlet.
| 4.
REMOVE AIR CLEANER WITH HOSE |
 |
- Loosen the hose clamp.
Disconnect the air cleaner hose.
- Remove the 3 bolts and air cleaner with hose.
- Detach the wire harness clamp and disconnect the intake air temperature sensor connector.
| 5.
REMOVE INTAKE AIR TEMPERATURE SENSOR |
 |
- Remove the intake air temperature sensor from the air cleaner with hose.
| 6.
REMOVE ENGINE SERVICE HOLE COVER NO. 2 (w/ Intercooler)
|
 |
- Roll up the carpet.
Remove the 3 bolts and the engine service hole cover No.2.
| 7.
REMOVE DIESEL TURBO INLET AIR TEMPERATURE SENSOR (w/ Intercooler) |
 |
- Disconnect the diesel turbo inlet air temperature sensor connector.
Remove the diesel turbo inlet air temperature sensor and gasket.