2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Apr 2016

Versions by build date: Oct 2014 – Mar 2016 from Apr 2016


1. REMOVE NO. 1 ENGINE UNDER COVER (for Cold Area Specification Vehicles)
  1. Remove the 4 bolts and No. 1 engine under cover.


2. DISCONNECT OIL COOLER TUBE (for Automatic Transmission)

  1. A241038E01
    Detach the 2 oil cooler hose clamps.

  1. Slide the 2 hose clamps and disconnect the 2 oil cooler hoses from the 2 oil cooler tubes.


3. REMOVE FAN BRACKET SUB-ASSEMBLY

  1. A263716E02
    w/ DPF:
    Disconnect the 4 connectors from the injector driver.
    Text in Illustration 
    *A
    w/ DPF
    *B
    w/o DPF

  1. Detach the clamp.

  1. Remove the 2 bolts, 2 nuts and fan bracket sub-assembly.


4. REMOVE FAN SHROUD

  1. A242203E02
    w/ Air Conditioning System:
    Detach the 2 clamps and disconnect the 2 connectors.
    Text in Illustration 
    *A
    w/ Air Conditioning System
    *B
    w/o Air Conditioning System

  1. w/o Air Conditioning System:
    Detach the 3 clamps and disconnect the connector.

  1. A241041
    Remove the 6 bolts and fan shroud from the underside of the vehicle.


5. REMOVE NO. 1 FAN

  1. A243255E01
    Remove the 3 screws and No. 1 fan.


6. REMOVE NO. 2 FAN (w/ Air Conditioning System)

  1. A241032
    Remove the 3 screws and No. 2 fan.


7. REMOVE NO. 1 COOLING FAN MOTOR

A243256E01
  1. Remove the 5 screws and No. 1 cooling fan motor.


8. REMOVE NO. 2 COOLING FAN MOTOR (w/ Air Conditioning System)

A241033
  1. Remove the 5 screws and No. 2 cooling fan motor.

← REMOVAL (Oct 2014 – Mar 2016)INSTALLATION (Oct 2014 – Mar 2016) →