2014-2019 Hiace · Service Manual BODY

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Oct 2014


SELF-DIAGNOSTIC SYSTEM

HINT:
  1. The self-diagnostic system has 3 modes: operation confirmation mode, input confirmation mode and malfunctioning operation memory mode.
  2. In operation confirmation mode, the system can be checked for switch malfunctions by performing a predetermined door operation. If a switch malfunction is detected, a code will be output and a buzzer will sound.
  3. In input confirmation mode, the system checks if each switch is inputting data properly. If a switch malfunction is detected, a buzzer will sound.
  4. In malfunctioning operation memory mode, switch malfunctions that are detected while using the system are saved in memory. Then the memory can be accessed and read.
  5. 3 modes are available for use with the self-diagnostic system inspection: self-diagnostic mode 1, self-diagnostic mode 2 and self-diagnostic mode 3.
  6. During self-diagnostic mode 1, the operation confirmation mode's switch malfunction detection function and input confirmation mode are performed.
  7. During self-diagnostic mode 2, the switch malfunctions that were detected during operation confirmation mode (self-diagnostic mode 1) are output by sounding buzzer patterns.
  8. During self-diagnostic mode 3, malfunctioning operation memory mode is entered and codes are output by sounding buzzer patterns.

B162999E01
← TERMINALS OF ECU (from Oct 2014)DTC CHECK / CLEAR (from Oct 2014) →