REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE ROOF HEADLINING ASSEMBLY |
- for Semi-trim: (Click here)
- for Full-trim: (Click here)
| 4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER |
Remove the 2 bolts.

Detach the 2 guides to remove the tire pressure warning ECU and receiver.
Disconnect the connector from the tire pressure warning ECU and receiver.
