2014-2019 Hiace · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
  1. Connect the connector to the tire pressure warning ECU and receiver.

  1. Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.

  1. Install the 2 bolts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }


2. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Semi-trim: (Click here)
  2. for Full-trim: (Click here)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. REGISTRATION OF TRANSMITTER ID
(Click here)

5. INSPECT TIRE PRESSURE WARNING SYSTEM
(Click here)

6. PERFORM INITIALIZATION
(Click here)
← REMOVAL (from Jan 2017)COMPONENTS (from Jan 2017) →