2014-2019 Hiace · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT POWER SLIDE DOOR TOUCH SENSOR

B164209E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.

      Standard resistance:
      Condition
      Specified Condition
      OFF(Sensor not pressed)
      Approximately 1 kΩ
      ON(Sensor pressed)
      Approximately 100 Ω or less

      If the result is not as specified, replace the power slide door touch sensor.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →