If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.
Torque:
30 N*m{
306 kgf*cm
, 22 ft.*lbf
}
HINT:
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Text in Illustration
*a
Torque Wrench Fulcrum Length
When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)
The sensor has 3 paint marks as shown in the illustration.
2.
INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR
NOTICE:
If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.
Text in Illustration
*a
Wire Harness Tube Color (Orange)
Torque:
30 N*m{
306 kgf*cm
, 22 ft.*lbf
}
HINT:
The exhaust gas temperature sensor has a orange wire harness as shown in the illustration.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Text in Illustration
*a
Torque Wrench Fulcrum Length
When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)
3.
INSTALL EXHAUST GAS TEMPERATURE SENSOR
NOTICE:
If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.
Text in Illustration
*a
Wire Harness Tube Color (Yellow)
Torque:
30 N*m{
306 kgf*cm
, 22 ft.*lbf
}
HINT:
The exhaust gas temperature sensor has a yellow wire harness as shown in the illustration.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Text in Illustration
*a
Torque Wrench Fulcrum Length
When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)