2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. A239816E01
    Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }

    HINT:

    1. A329093E02
      Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
      Text in Illustration 
      *a
      Torque Wrench Fulcrum Length
    2. When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)
    3. The sensor has 3 paint marks as shown in the illustration.


2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. A380559E01
    Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.
    Text in Illustration 
    *a
    Wire Harness Tube Color
    (Orange)

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }

    HINT:
    1. The exhaust gas temperature sensor has a orange wire harness as shown in the illustration.

    2. A329093E02
      Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
      Text in Illustration 
      *a
      Torque Wrench Fulcrum Length
    3. When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)


3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. A380558E01
    Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.
    Text in Illustration 
    *a
    Wire Harness Tube Color
    (Yellow)

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }

    HINT:
    1. The exhaust gas temperature sensor has a yellow wire harness as shown in the illustration.

    2. A329093E02
      Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
      Text in Illustration 
      *a
      Torque Wrench Fulcrum Length
    3. When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)


4. INSTALL FRONT EXHAUST PIPE ASSEMBLY
(Click here)
← INSTALLATION (Apr 2016 – Dec 2016)COMPONENTS (from Oct 2014) →