2014-2019 Hiace · Service Manual CRUISE CONTROL SYSTEM

P0575 Cruise Control Input Circuit

Diagnostic trouble codes · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017

DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.
DTC Code
DTC Detection Condition
Trouble Area
P0575
Either condition is met:
  1. The cruise control input signal is abnormal.
  2. The stop light switch input signal is abnormal.
ECM

INSPECTION PROCEDURE

NOTICE:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC P0575 is not output.

Result 
Result
Proceed to
OK
A
NG (for 1KD-FTV)
B
NG (for 2TR-FE)
C


B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← P0571 Stop Light Switch Circuit Malfunction (from Dec 2017)P0575 Cruise Control Input Circuit (Jan 2015 – Mar 2016) →