2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Dec 2015

Versions by build date: Oct 2014 – Nov 2015 from Dec 2015


1. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for China)
  1. Attach the 4 claws to install the front bumper extension mounting bracket.

  1. Install the 2 screws.


2. INSTALL LOWER NO. 1 RADIATOR GRILLE
  1. Attach the 16 claws to install the lower No. 1 radiator grille.


3. INSTALL FRONT BUMPER HOLE COVER

HINT:
Use the same procedure for both front bumper hole covers.

  1. Attach the 2 claws to install the front bumper hole cover.


4. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
  1. Attach the 2 guides to install the fog light assembly LH to the fog light mounting bracket LH.

  1. Attach the 2 claws.


5. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.


6. INSTALL FOG LIGHT COVER LH (w/ Fog Light)
  1. Attach the 3 claws to install the fog light cover LH.


7. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.


8. INSTALL FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
  1. Attach the 4 claws to install the fog light mounting bracket LH.

  1. Install the 2 clips.


9. INSTALL FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.


10. INSTALL LOWER RADIATOR GRILLE LH (w/o Fog Light)
  1. Attach the 4 claws to install the lower radiator grille LH.

  1. Install the 2 clips.


11. INSTALL LOWER RADIATOR GRILLE RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.


12. INSTALL NO. 4 ENGINE ROOM WIRE (w/ Fog Light)
  1. Attach the 10 clamps to install the No. 4 engine room wire.

  1. Connect the 2 fog light connectors.

← REASSEMBLY (Oct 2014 – Nov 2015)INSTALLATION (from Oct 2014) →