INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY |
for Angular Type:
Install the intake mass air flow meter with the 2 screws.
- Torque:
- 1.0 N*m{ 10 kgf*cm , 9 in.*lbf }
Attach the clamp and connect the connector to the air cleaner.
Install the air cleaner with hose with the 3 bolts.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
Tighten the hose clamp.
- Torque:
- 4.5 N*m{ 46 kgf*cm , 40 in.*lbf }
Install the No. 1 air cleaner inlet with the bolt.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
Install the headlight assembly RH (Click here).
for Round Type:
Install the mass air flow meter with the 2 screws.
- Torque:
- 1.0 N*m{ 10 kgf*cm , 9 in.*lbf }
Connect the mass air flow meter connector.
Install the air cleaner inlet with the clip and 2 bolts.
- Torque:
- 18 N*m{ 178 kgf*cm , 13 ft.*lbf }
| 2. INSTALL FRONT BUMPER COVER |
- for Standard Body (Click here)
- for Wide Body (Click here)
