2014-2019 Hiace · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Mar 2016

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017

HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL NO. 4 ROOF WIRE (NO. 2 ANTENNA CORD SUB-ASSEMBLY) (w/ Rear View Monitor System)
  1. Attach the guide and each clamp to install the No. 4 roof wire (No. 2 antenna cord sub-assembly).

  1. Connect each connector.

  1. Install the bolt.


2. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Rear View Monitor System)
  1. Attach the guide and each clamp to install the No. 2 antenna cord sub-assembly.

  1. Connect each connector.

  1. Install the bolt.


3. INSTALL ROOF HEADLINING
(Click here)

4. INSTALL INSTRUMENT PANEL ASSEMBLY
(Click here)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


6. CHECK SRS WARNING LIGHT (w/ Airbag System)
(Click here)
← REMOVAL (from Jan 2017)INSTALLATION (Apr 2016 – Dec 2016) →