DISASSEMBLY
Removal / installation · Vehicles built from Jan 2017
| 1. REMOVE TURBOCHARGER VANE CONTROL ROD SUB-ASSEMBLY |
![]() ![]() |
Secure the flange of the turbine housing sub-assembly of the turbocharger sub-assembly in a vise between aluminum plates.
- NOTICE:
- Do not tighten the vise more than necessary, as doing so will damage the flange of the turbine housing sub-assembly.
Remove the 2 E-washers from the variable nozzle vane motor assembly and turbocharger vane control link sub-assembly.

- NOTICE:
- Do not reuse the E-washer.
Remove the turbocharger vane control rod sub-assembly.
| 2. REMOVE TURBOCHARGER NOZZLE VANE CONTROL ACTUATOR |
![]() ![]() |
Remove the 3 bolts and turbocharger nozzle vane control actuator.


