2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    89.3 to 159.8 kΩ

    HINT:
    The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.

    If the result is not as specified, replace the exhaust gas temperature sensor.


INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    89.3 to 159.8 kΩ

    HINT:
    The temperature indicated in "Condition" is the temperature of the No. 2 exhaust gas temperature sensor.

    If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.


INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    89.3 to 159.8 kΩ

    HINT:
    The temperature indicated in "Condition" is the temperature of the No. 3 exhaust gas temperature sensor.

    If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →