86300C
1.INSTALL NO. 2 AMPLIFIER ANTENNA ASSEMBLY
|
Install in this Direction |
Install a new No. 2 amplifier antenna assembly as shown in the illustration.
|
Bolt |
|
Nut |
Install a new bolt and nut in the order shown in the illustration.
Connect the connector.
2.INSTALL ROOF HEADLINING ASSEMBLY
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
5. PERFORM DIAGNOSTIC SYSTEM CHECK
6.CHECK SRS WARNING LIGHT
7.INSPECT SEAT BELT WARNING SYSTEM