Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.SECURE VEHICLE
Fully apply the parking brake and chock a wheel.
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
55314A
2.REMOVE CENTER LOWER INSTRUMENT PANEL
87211
3.REMOVE NO. 1 AIR DUCT (for LHD)
87211
4.REMOVE NO. 1 AIR DUCT (for RHD)
33820B
5.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for Shift Lever Assembly Side)
33530K
6.REMOVE SHIFT LEVER ASSEMBLY
Remove the 4 bolts and shift lever assembly.