82641
1.INSTALL NO. 1 INTEGRATION RELAY
Connect the 4 connectors.
|
Install in this Direction |
Attach the claw and install the No. 1 integration relay.
82662A
2.INSTALL NO. 1 RELAY BLOCK COVER
|
Install in this Direction |
Attach the claw and guide and install the No. 1 relay block cover.
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
for 7GR-FKS:
for 1GD-FTV:
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART