To prevent burns, do not remove the engine oil level sensor while the engine is hot.
51406A
1.REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)
52618
2.REMOVE LOWER FRONT BUMPER ABSORBER
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE OIL
89491
5.REMOVE ENGINE OIL LEVEL SENSOR
To prevent burns, do not remove the engine oil level sensor while the engine is hot.
Disconnect the connector from the engine oil level sensor.
Remove the 4 bolts and engine oil level sensor from the oil pan sub-assembly.